SB Type Pulling Tool Wireline Pulling Tool
I. Overview:
S-type fishing tool is an external fishing tool. Its structure
principle is similar to JD fishing tool, and the outer fishing neck
is grasped by special claws, which can be released by downward
shock. According to the different gripping distance, it can be
divided into SB and SS
II. Main technical parameters of tools:
| Size | Actual outer diameter | Fishing neck | Connection | Grab diameter |
| 1.5＂ | 1.43＂ | 1.187＂ | 15/16UN | 1.187＂ |
| 2＂ | 1.77＂ | 1.375＂ | 15/16UN | 1.375＂ |
| 2.5＂ | 2.18＂ | 1.75＂ | 15/16UN | 1.75＂ |
| 3＂ | 2.74＂ | 2.313＂ | 15/16UN | 2.313＂ |
According to customer's requirements, we can also provide products
with required specifications and parameters.
III.salvage operation steps:
1. Connect the fishing tool to the basic tool string and go down
the well;
2. Lower the tool string slowly when going down to the preset
position;
3. Wait for the tool to grasp the outer fishing neck and shock
upwards;
4. When you can't shake it up, you can shake it down.
IV. Handling after taking out tools:
After pulling out the tool, insert the releasing tool or
screwdriver into the releasing position, pry open the fishing claw,
and then release the tool.
V. Precautions:
Before running the tool, check that the threads at the joint of the
tool are not loose.According to customer's requirements, we can
also provide products with required specifications and parameters.
Welcome to contact us at any time.
